WARMAN

He Warman® AH® pump is the world’s standard for heavy duties. A wide variety of impellers and shaft seals provide a perfect fit for a wide range of applications. The AH® pump provides excellent wear life while maintaining efficiency during the wear cycle providing the best total operating cost. The Warman® AH® pump, together with the Warman® MC series pump, provides a complete selection for most all duties in the mill. From cyclone feed to regrind, flotation and tailings, the Warman® AH® pump is the best choice.

Key features/benefits

Bearing assembly – a large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame.
Liners-easily replaceable liners are bolted, not glued, to the casing for positive attachment and ease of maintenance. Hard metal liners are completely interchangeable with pressure moulded elastomer.
Elastomer seal rings back all liner joints.
Casing–Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety.
Impeller–front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and moulded elastomer impellers are completely interchangeable.
Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available.
Throatbush–wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.
One-piece frame – a very robust one-piece frame cradles the cartridge type bearing and shaft assembly.
An external impeller adjustment mechanism is provided below the bearing housing for easy adjustment of impeller clearance

Applications

Mill discharge
Process pumps
Low pressure tailings

Processes

Slurry transportation
Tailings Management
Wet sand pumping

Categories: PUMPS, WARMAN

Description
Product Inquiry

Product Description

20150826 WARMAN WRT Brochure

Warman Centrifugal Slurry AH Pump

Design standards	Hydraulic Institute 6, ISO 9001, ISO 14001, OHSAS 18001 & CE certified
Design ratings	N/A
Size range/-dimensions	Discharge size 1″ to 18″ (25 mm to 450 mm)
Pressure class/-power	Heads to 240ft (73m) Pressure to 300 psi (2020 kPa)
Temperature range	1-100°C
Capacity	Capacities to 22,000 gpm (5,000 m3/h)

Materials

High chrome iron, Synthetic and natural rubber, Polyurethane, Corrosion resistant alloys

WARMAN

Key features/benefits

Applications

Processes

Product Description

Materials

Related Products

SIHI

LOWARA

CNP

EBARA PUMP